by Julie Noyas | Jul 5, 2016 | Vases & Bouquet Holders
Item Number: V-01
Height: 10″
Production Dates: 1924-1943
The Fostoria American Cupped Vase is named appropriately, as the top of the vase is “cupped” inward. The body shape is similar to the extremely rare Bagged Vase; however, what makes them different is the reshaping of their respective necks. The Cupped Vase was discontinued in the early 1940’s. While it is not the rarest of vases, it’s not a common find either.
The height of the Cupped Vase is approximately 10 inches; however, it can vary slightly. The inside neck has an opening of about 3½” inches. The neck itself is void of any cubed design, and is a thick 2″ band of clear glass that cups inward. The bottom of the vase is approximately 3¼” wide.
As an eBay Partner, I may be compensated if you make a purchase on eBay. The following link shows available Cupped Vases on eBay.
by Julie Noyas | Jun 30, 2016 | Vases & Bouquet Holders
Item Number: V-06, V-07, V-08, V-09
Height: Varies from 9″ to 26″
Production Dates: V-07, V-08, V-09 1915-1927 and V-06 1937-1944
Swung Vases are fascinating, as they were literally swung into shape from various sizes of straight vases. Heights range from 9″ all the way to 23″-26″. Vases vary in height by as much as 2-3 inches. The height variation applies to all sizes, with the biggest variation found in the tallest Swung Vase.
The American pattern was introduced in 1915. It was at this time that three Swung Vases made their debut. The three sizes that were made from 1915-1927 are:
- 15″ Swung Vase (height varies from 14-16 inches) – Item V-07
- 20″ Swung Vase (height varies from 18-20 inches) – Item V-08
- 25″ Swung Vase (height varies from 23-26 inches) – Item V-09
Later, around 1937, a smaller 9″-12″ Swung Vase (V-06) was introduced. It was produced from 1937-1944. By this time, the previous taller versions were no longer in production. The smaller Swung Vase is not easily found; however, they are easier to locate than the taller vases. Prices and rarity rankings increase in correlation to the height and size of the vase. In other words, the smaller 9″-12″ Swung Vase is less expensive and easier to locate than the rarest and most expensive of them all – the 25″ Swung Vase.
Even though the Swung Vases are tall and narrow, they do have a substantial base on which to sit. This is very important, because truth be told … these vases could topple over much easier than other American vases. The Swung Vases are absolutely stunning.
As an eBay Partner, I may be compensated if you make a purchase on eBay. The following link shows available Swung Vases on eBay.
by Julie Noyas | Jun 15, 2016 | Cake Salvers & Servers
Item Number: 306
Diameter: 10″
Production Dates: 1948-1982
The Handled Cake Plate is a very versatile piece. When compared to other Fostoria American cake serving pieces, it is smaller in scale and general appearance. With two handles, it is very easy to transport from one place to the next – and is not bulky in weight. It is a very useful dish for serving a variety of foods – from desserts, appetizers, breads, etc.
The Handled Cake Plate is approximately 10″ in diameter. The measurement from handle to handle is about 12″. It has a beautiful starburst (or ray) design in the center.
As an eBay Partner, I may be compensated if you make a purchase on eBay. The following link shows available Handled Cake Plates on eBay.
by Julie Noyas | Jun 6, 2016 | Vases & Bouquet Holders
Item Number: V-03
Height: 5½″
Production Dates: 1915-1923
The complete Flower Pot, with its Cover, is approximately 5½” in height. That height measurement could vary slightly. Remember, these items were hand-made. Some books state the height measurement as 4½”; however, the 1915 Fostoria catalog lists the complete Flower Pot (with Cover) at a height of 5½”. The perforated Cover, by itself, is almost 1″ thick. The diameter of the Flower Pot, with its perforated Cover, is approximately 9½”.
As an eBay Partner, I may be compensated if you make a purchase on eBay. The following link shows available Flower Pots on eBay.
Just remember, the Flower Pot is very hard to find – so the search results might be minimal – if any. You could also try to find one at Replacements.com, estate sales, glass shows, etc.
by Julie Noyas | May 25, 2016 | Vases & Bouquet Holders
Item Number: 745
Height: 4½″
Production Dates: 1935-1958
The Fostoria American Sweetpea Vase is just that – sweet. While most people today spell “sweet pea” as two separate words, the Fostoria Glass Company did describe and spell the vase as one word – “Sweetpea”. With a bowl shape, the sides gradually flow upward and outward. Instead of a serrated top edge, this vase’s edging is clear and smooth.
The Sweetpea Vase is approximately 4½” high, with a top opening of about 7″. The bottom of the vase has a ray or petal-like design, and is about 3″ in diameter. When viewing the Sweetpea Vase online – or in pictures – the size can be deceiving. It looks small; much like a cup. It is not small or slight in weight. A hefty piece of glass it is, and quite substantial.
The Sweetpea Vase is not a rare piece; however, it is not common either. It was produced at the Fostoria Glass Factory from around 1935 – 1958. The form and shape of this lovely vase is just perfect for making a floral arrangement with delicate and fragrant Sweet Pea’s.
As an eBay Partner, I may be compensated if you make a purchase on eBay. The following link shows available Sweetpea Vases on eBay
by Julie Noyas | Mar 10, 2016 | Cake Salvers & Servers
Item Number: 631
Width: 10″
Production Dates: 1924-1982
The Fostoria American Square Salver is a very impressive piece of glass. While most people today call this piece a “Cake Stand”, Fostoria called it a “Salver” – which simply means a tray that was especially made for serving food or beverages. Fostoria produced two Salvers – the square one you see pictured here, and the beautiful Round Salver. Other cake stands and/or servers were also made.
The Square Salver is approximately 10″ in width, with a height of about 7¼”. When the two Salvers were produced, Fostoria Glass Company put a higher price tag on the Square Salver. Most of the time, but not always, it is more expensive to buy in today’s market than the Round Salver. The Round Salver was introduced first, around 1916. A few years later, the Square Salver was introduced. Both were kept in the production line until approximately 1982.
As an eBay Partner, I may be compensated if you make a purchase on eBay. The following link shows available Square Cake Salvers on eBay.
