by Julie Noyas | Jul 26, 2016 | Vases & Bouquet Holders
Item Number: 758
Height: 6″
Production Dates: 1935-1970
Many different types of vases were produced in the Fostoria American pattern. There were three different sizes made for the vases that had flared top edges (with mainly straight sides). The Flared Vase pictured here is the 6″ size, which is the smallest of the trio. The next size up was an 8″, and the tallest was a 10″. All of them were introduced into the American pattern in the mid-to-late 1930’s.
The Flared Vases are some of my most favorite pieces in the Fostoria American Line (#2056). The top edge of the vases flare slightly outward, just enough to allow the flowers to drape gently to the sides. Another advantage that I find with the Flared Vases is that they are easier for me to move around the house. I don’t worry as much about dropping them, or my hands slipping off, as I do with a more straight-edged vase.
As seen in this photo, you will note that the main difference between the three sizes is their height – each one being about 2″ taller than the next. All of them have a good solid base and are very substantial.
As an eBay Partner, I may be compensated if you make a purchase on eBay. The following link shows available Flared Vases on eBay.
by Julie Noyas | Jul 25, 2016 | Vases & Bouquet Holders
Item Number: 786
Height: 8″
Production Dates: 1935-1970
Many different types of vases were produced in the Fostoria American pattern. There were three different sizes made for the vases that had flared top edges (with mainly straight sides). The Vase pictured here is the 8″ size. The next size up was an 10″, and the smallest was a 6″. All of them were introduced into the American pattern in the mid-to-late 1930’s.
The Flared Vases are some of my most favorite pieces in the Fostoria American Line. The top edge of the vases flare slightly outward, just enough to allow the flowers to drape gently to the sides. Another advantage that I find with the Flared Vases is that they are easier for me to move around the house. I don’t worry as much about dropping them, or my hands slipping off, as I do with a more straight-edged vase.
There is great clarity with the glass – with very little distortion. The top edge of the vase flares gently outward, and is very smooth to the touch. The lower portion of the vase is straight-sided; however, the base extends further outward – providing a very stable footing. The bottom of the vase is smooth, with a petal-like design.
As an eBay Partner, I may be compensated if you make a purchase on eBay. The following link shows available Flared Vases on eBay.
by Julie Noyas | Jul 24, 2016 | Vases & Bouquet Holders
Item Number: 815
Height: 10″
Production Dates: 1938-1970
There were three different sizes made for the vases that had top flared edges, with mainly straight sides. The Flared Vase pictured here is the 10″ size, which is the tallest of the three. All of them were introduced into the American pattern in the mid-to-late 1930’s, with the 10″ Flared Vase being introduced last – and discontinued first. Therefore, in my opinion, it is more valuable than the two smaller sizes.
The top edge of the vase flares slightly outward, just enough to allow the flowers to drape gently to the sides. I find that this characteristic of the vase greatly reduces my flower “arranging” time. Flowers seem to automatically stand straight in the center, and drape to the sides. The opening of the vase is approximately 5¾” wide, so it can accommodate a large bouquet with ease. No matter the type of floral arrangement you place in the vase, all of them look beautiful – even this inexpensive assortment bought at a local supermarket.
As an eBay Partner, I may be compensated if you make a purchase on eBay. The following link shows available Flared Vases on eBay.
by Julie Noyas | Jul 23, 2016 | Vases & Bouquet Holders
Item Number: 146
Approximate Size: 3½” H
Production Dates: 1916-1944 and 1946-1958
The Fostoria American pattern produced Rose Bowls in two different sizes – a 3½” version, and a larger 5″ Rose Bowl. The one pictured here is the 3½” size.
This particular Rose Bowl has a neck opening of about 1¾”. There is a band of approximately 1″ of clear glass surrounding the neck. The individual cubes on this Rose Bowl appear larger than most other pieces in the American line. The base of this Rose Bowl is approximately 2½” wide, with a pointed ray design on the bottom.
Of the two Rose Bowls produced, it is this smaller version that debuted first. The only year it does not appear to have been made during its production year range is 1945. Only the 5″ Rose Bowl is noted in the catalog for that year.
As an eBay Partner, I may be compensated if you make a purchase on eBay. The following link shows available Rose Bowls on eBay.
by Julie Noyas | Jul 22, 2016 | Vases & Bouquet Holders
Item Number: 149
Approximate Size: 5″ H
Production Dates: 1935-1958
The Fostoria American pattern produced Rose Bowls in two different sizes – a 3½″ version, and a larger 5″ Rose Bowl. The one pictured here is the 5″ size. This particular Rose Bowl has a neck opening of about 2 inches. There is a band of approximately 1″ of clear glass surrounding the neck.
The base of this Rose Bowl is approximately 3¼″ wide, with a pointed ray design on the bottom. Of the two Rose Bowls produced, it is this larger version that was introduced last. Both of the different-sized Rose Bowls were discontinued in the late 1950s.
It is important to note that the 5″ Rose Bowl was later “reproduced” (or re-released) after the Fostoria Glass Company was sold. Other companies, such as Lancaster Colony, reproduced this item. Reproduced pieces can vary in glass quality and in the design. The neck (or opening) of the reproduced 5″ Rose Bowl usually has a larger opening than the one made at the Fostoria Glass Factory. Older Fostoria pieces had a ground bottom and offered greater brilliance from fire polishing.
As an eBay Partner, I may be compensated if you make a purchase on eBay. The following link shows available Rose Bowls on eBay.
by Julie Noyas | Jul 21, 2016 | Vases & Bouquet Holders
Item Number: 804
Height: 9″
Production Dates: 1933-1974
This is the Fostoria American Square Footed Vase. Unlike some of the other vases in the American pattern, Fostoria only made one size in this design. The height measurement appears to vary (depending on what book or resource you are reading). The official Fostoria Glass catalogs published the height as 9 inches; however, there are published books on Fostoria American that state the height as 10 inches. So, I took a ruler out and measured my personal Square Footed Vase … the measurement was 9¾” tall. This is a fine example of how a piece can vary in size, all due to the hand craftsmanship of each and every vase.
The top diameter is approximately 5″ and the foot is about 3¼” square. The design is such that you won’t get it easily confused with other vases in the American line, for it has a unique shape all its own. Fostoria named the vase perfectly – the “Square Footed Vase”. It is, indeed, that.
While the Square Footed Vase was predominately made in clear crystal, it was also made in Milk Glass. The last pieces were produced in the 1970’s. After Fostoria closed, some of the American moulds were purchased by other glass companies. Fenton Glass was one of those companies, and they reproduced this piece in a wide variety of colors. They even produced it in a “Key Lime” color, with a stretch glass treatment.
As an eBay Partner, I may be compensated if you make a purchase on eBay. The following link shows available Square Footed Vases on eBay.
